Hang A Wall-Mountable LCD Monitor on Your Wall

Mount your LCD on the wall with ease in 8 simple steps!

Tools Needed:

·       Hammer

·       Phillips Head Screwdriver

·       Stud Finder (optional) 

1)  Determine the preferred location, height and positioning of your wall mountable LCD (s).                            

Note:  It is desirable to secure the mounting  hardware into a solid foundation.  Locate a wall stud if walls are drywall or composite construction.

2)  After locating the most secure surface, select and mark with pencil the desired height of the monitor on your wall.

3)  Affix the mounting hardware to the wall using a hammer.

4)  Using your screwdriver, loosen all 4 screws on the mounting plate located at the back of the LCD.

5)  Place the pre-bent ends of the wire on the bottom 2 screws and tighten the screws.

6)  Bend the wire slightly so that it fits around the outside of all 4 screws.  Tighten the top screws to secure the wire.

7)  Using fingers, grasp the wire in the center BETWEEN THE 2 TOP SCREWS and pull toward the top of the LCD.  This will remove the slack in the wire.

8)  Place the wire in the center of the mounting hook to hang.